How to Make a Cornice Window Treatment as an Expert
Aren't
you sure how to make window treatment cornice as an expert? Have you seen these
window treatment styles, but don't know how to make them? Do you desire to save
some money by making a window topper like this for yourself? You will find the answer to these questions and
more here in this article….
What you need to make a fabric covered window
cornice
1/4 inch thick plywood
1 inch thick fiber wadding
Large pair of sharp fabric scissors
Back tacking strip
Staple gun and staples
Spray adhesive
Velcro tape
Drapery fabric
Drapery lining fabric
The drapery fabrics
You
will need a drapery fabric of your choice to cover the window treatment cornice.
I strongly recommend you choose a plain fabric if this is your first time
making a fabric covered window treatment cornice.
The
reason for this that if your cornice window treatment (including the sides) is
wider than the width of your fabric. Then you can turn the fabric sideways
(railroad the fabric) and use the length rather than the width. This way you
can cover the cornice without having to join 2 widths of fabric.
This clearly
means no sewing is required, great if you can't use a sewing machine.
I do
this all the time even if it means the weave of the fabric runs in the opposite
direction to the curtains. An example of this would be silk drapery fabric
where the slub in the fabric would run across the curtain and down the pelmet.
Even so it looks a whole lot better than seeing a fabric seam on the front of
your pelmet.
You
will need Curtain lining fabric to cover the back of your cornice window
treatment. This hides the plywood used to stiffen the pelmet. I again use the
fabric lengthways to avoid the need for seams. It's not so much for the look
this time but rather just to make life easier.
Finally
to make cornice window treatment you will need either a thick curtain
interlining fabric or a sheet of polyester wadding (my personal favorite)
to give the pelmet a softer padded look.
0 comments:
Post a Comment